Complete Conversion BOM
(911)

Brackets & Mounts

Includes: Transmission Adapter, Suspension Cross Brace, Engine Mounts, Front Engine Bracket, Transmission Adapter Kit, Transmission Adapter & Front Engine Bracket Hardware

• Transmission Adapter Kit:

  • Drill Jig

  • Cut Jig

  • Speed Sensor

  • 18mm Drill

  • Clutch Fork

  • B8 Pivot Ball

  • Fork Clip

  • Clutch Alignment Tool

  • 1x M6x45 SS

  • 2x M6 Nut

  • 1x M6 Nylock Nut

• Transmission Adapter Hardware:

  • 2x Hardened Dowel

  • 4x M10x30 HFH

  • 1x M10x75 HFH

  • 1x M10 Flanged Nut

  • 2x M12x60 HFH

  • 1x M12x70 HFH

  • 1x M12x90 HFH

  • 1x M12x100 HFH

• Front Engine Bracket Hardware:

  • 2x M8x30 HFH

  • 7x M10x30 HFH

  • 4x M10 Flanged Nut

Twin Turbo Kit

Includes: Turbo Manifolds, Exhaust Piping, Charge Piping, 50mm BOV, Air to Water Intercooler, Auxiliary Water Cooling: (Tank, Pump, Lines, Pump Pigtail), G25-550 Turbos, Oil Lines, Vacuum Lines, Air Filters, Fender Liners, AEM Wideband Controller, HPX-E MAF & Pigtail, 2.5 Bar Map Sensor, Base Tune & ECU Preparation, Hardware

• Hardware:

  • 1x -4an Tee

  • 1x -4an to M10x1mm

  • 2x 2”x2” Rubber Pads

  • 2x 59-63mm Clamp

  • 6x 68-73mm Clamp

  • 6x 73-79mm Clamp

  • 8x 1” SS Hose Clamp

  • 14x Fender Liner Screws

  • 4x M6 Rivnut

  • 4x M6 Bolt

  • 1x SS #10 Self Tapping

Electrical

Includes: VIM (Chassis Specific), Oil Level and Temperature Sensor, ECU Bracket, 2x Porsche 25p Connectors, Contacts, Wire Seals, Crimps, Cushion Clamp

ME 7.1.1 also Includes: Relay Bridge

996.1 DBC also Includes: Potentiometer Bracket

Clutch & Flywheel

Includes: Flywheel, Disc, Pressure Plate, Hardware

• Hardware:

  • 8x VAG Flywheel Bolts

  • 6x M8x16 CH

Fueling

Includes: 621cc Injectors, 340LPH Fuel Pump, Convoluted Lines, Fittings, Hardware

996.2 also Includes: Sending Unit, Return Line, Additional Fittings and Hardware

• Fittings:

  • 1x M14x1.5mm Swivel Nut to Barb

  • 1x 5/16 Bundy Straight (996.2 only)

  • 1x 5/16 Budy Elbow (996.2 only)

• Hardware:

  • 1x EFI Clamp

  • 2x 13.3mm Oetiker

  • 1x 15.7mm Oetiker (3x 996.2)

Air Conditioning

Includes: High Pressure Line, Low Pressure Line, Hardware

• Hardware:

  • 1x M8x16 CH

  • 2x M8x30 CH

  • 1x M8x40 CH

Power Steering

Includes: High Pressure Line, Suction Line, Return Line, Reservoir, Bracket, Hardware

• Hardware:

  • 2x M6x16 CH

  • 2x M6 Flanged Nut

  • 2x 21mm Oetiker Clamp

  • 2x 24.1mm Oetiker Clamp

  • 1x 3.25” Band Clamp

Engine Water Cooling

Includes: Drivers and Passenger Radiator Hoses, Heater Core Supply and Return Hoses, Tank to Oil Cooler Hose, Expansion Hose, Caps, Fittings, Hardware

• Caps:

  • 2x 1/2”

  • 1x 3/4”

  • 1x NW 16

  • 1x Sensor Port

• Fittings:

  • 1x NW 32 Elbow

  • 1x M10x1 to 1/2” Barb

• Hardware:

  • 5x 27mm Worm Clamp

  • 3x 32mm Worm Clamp

  • 1x 44mm Worm Clamp

  • 2x 51mm Worm Clamp

  • 2x 24.1mm Oetiker Clamp

  • 2x 30.1mm Oetiker Clamp

  • 1x 45.5mm Oetiker Clamp

Engine Components

Includes: Catch Can, Breather Hoses, Manifold Caps, Clutch Fan Blockoff, Oil Feed Blockoff, Oil Drain Adapters, Brake Booster Adapter, EGR Block Offs, Oil Filler, Oetiker Pliers, Hardware

• Hardware:

  • 8x M6x16mm CH

  • 1x M10x1mm to M14x1.5mm Adapter

  • 2x M10 Crush Washer